Cómo instalar Hiper-V on ventanas 10: Step-by-Step Guide with GUI, CMD, y PowerShell Methods.
Hyper-V System Requirements
Before you can learn how to install Hiper-V, it is imperative to ensure that your computer can meet all the system requirements. The general system requirements are the following:
- 64-bit Processor with at least 1.4 GHz CPU speed
- Second Level Address Translation (SLAT), which is used to reduce the hypervisor overhead and enhance the performance of the virtual machines (VMs)
- Support for máquina virtual Monitor Mode Extensions
- Minimum of 4 ES RAM to ensure that each running máquina virtual is allocated enough memory for efficient performance
- Hardware-assisted virtualization enabled through Intel Virtualization Technology (Intel VT) or AMD Virtualization (AMD-V) technology
- Hardware-enforced Data Execution Prevention (DEP) with the Intel XD bit (execute disable bit) or the AMD NX bit (no execute bit)
To check whether your system meets all the requirements for installing Hiper-V, open ventanas PowerShell or Command Prompt and type Systeminfo.exe. Scroll down to find the Hiper-V requirements section and check whether all the Hiper-V requirements read Sí. If they do, you can start to install Hiper-V on your computer. If any of the elements listed indicates No, try to make the necessary adjustments and rectify the issue.
ventanas 10 Hyper-V install with Graphical Interface (GUI).
Before we start – RMB (Botón derecho del ratón).
1. Click RMB on the Start button and then on “Control Panel“:
2. In the opened Control Panel on “Programs and Features“:
3. Than on “Turn ventanas Features on or off” (you must have admin rights for doing this):
4. In the opened window select all in “Hiper-V” and click “DE ACUERDO“:
5. After that begin installation:
6. When the installation is finished Restart now for a reboot:
7. After rebooting click on the Start button and find in the application list “ventanas Administrative Tools“:
8. “ventanas Administrative Tools” “Hiper-V Gerente" (you may pin that where you need):
9. That’s all, we deploy hyper-v en ventanas 10:
ventanas 10 Hyper-V install with CMD (DISM)
1. Run CMD with admin rights Símbolo del sistema (Administración):
2. en el abierto ventanas insert the text string:
DISM /Online /Enable-Feature /All /FeatureName:Microsoft-Hyper-V
And, prensa Ingresar:
3. After installation is finished – you need to reboot your machine by pressing Ingresar. You may set “n” and press Ingresar, and reboot later. Hiper-V will work only after reboot.
4. After the reboot is finished – check our Hiper-V. Press the Start button to show your apps. In the apps find the folder Windows Administrative Tools, in the folder run Hiper-V Gerente:
5. And we get that we need:
ventanas 10 Hyper-V install with PowerShell
1. Press el Start button, in the programs list, find ventanas Power Shell carpeta. Correr PowerShell with admin rights:
2. Wait until PowerShell will start:
3. After PowerShell starts – enter the next command:
Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V -All4. Press Ingresar to start:
5. When the installation is complete – you must reboot your device and press Ingresar. Hiper-V will work only after reboot.
6. After the reboot is finished – check our Hiper-V. Press el Start button to show your apps. In the apps find the folder ventanas Administrative Tools, and in the folder run Hiper-V Gerente:
7. After all – we get what we need.
