How to Configure DNS Role in Serveur Windows 2016: Un guide étape par étape. It is similar to Serveur Windows 2012 R2 Role.
- Launch the DNS management console from the Tools drop-down in Server Manager;
2. When DNS was installed, a forward lookup zone for enterinit.com was automatically created. The forward lookup zone maintains the mapping of hostnames to IP addresses;
3. Cependant, a reverse lookup zone is not automatically created. This must be done manually. The reverse lookup zone maintains the mapping of IP addresses to hostnames (essentially, the reverse);
4. Right-click on Reverse Look Zone et sélectionnez New Zone;
5. Cliquez Suivant;
6. Select Primary zone as this will be created on this DNS serveur;
7. Leave as default (or config for your environment) et cliquez Suivant;
8. Select IPv4 Reverse Lookup Zone;
9. For this lab environment using the network 192.168.1.X;
10. Leave default Allow only secure dynamic updates, cliquez Suivant;
11. Cliquez Finish;
12. Once the reverse lookup zone is created, we need to create a PTR record for the domaine contrôleur.
13. Right-click on the reverse lookup zone and select New Pointer (PTR);
14. Cliquez sur le Browse bouton;
15. Sélectionnez le domaine contrôleur. Browse the forward lookup zone for the newly created domaine. Sélectionnez le domaine controller from your forward lookup zone and click D'ACCORD;
16. Confirm the information and click D'ACCORD;
17. The reverse PTR record will be created.
