Configuration Manager How to Install and Configure Distribution Point: Guia passo a passo.
Install Distribution Point
1. Open your SCCM Console. Go to Administration\Overview\Site Configuration\Servers and Site System Roles;
2. Selecione seu servidor de destino, select Distribution Point, and click Properties in the upper menu (ou Botão direito do mouse e clique Propriedades);
3. For the General aba. If you use HTTP don’t forget to enable the checkmark Permita que os clientes se conectem anonimamente (or you get errors at OSD deployments); Choose the option Import certificate, Selecione seu Certificado, and enter Senha;
4. Clique Apply and go to the PXE aba.
5. Para o PXE tab. Enable check mark Enable PXE supports for clients when getting message click Sim (remember this message text, it may help you).
6. Enable check mark Allow this distribution point to respond to incoming PXE requests. Enable check mark Enable unknown computer support e clique OK in the pop-up window;
7. If you have several network interfaces, you may choose who responds to PXE. Também, you may set PXE response delay if you need;
8. Clique Apply and go to the Multicast aba.
9. For the Multicast aba. Enable check mark Enable multicast to simultaneously send data to multiple clients;
10. Vá para o Content Validation aba.
11. For the Content Validation aba. Enable check mark Validate content on a schedule;
12. Click the button Schedule and make configuration, when complete click OK;
13. Go to Boundary Groups, if you already config groups for this DP you will see it here. Clique OK;
14. After some time if you open Gerenciador de servidores you will notice, that the WDS role added;
Configure the Network Access Account
1. Open SCCM Console. Go to Administration\Overview\Site Configuration\Sites. Select your site. Click in upper menu Settings\Configure Site Components\Software Distribution;
2. Go to o Network Access Account tab, select the option Specify the account that access network locations;
3. Click on the “sun” button and choose New Account;
4. Enter your service account User name (also may click Navegar and select an account from Active Directory), Senha e Confirm Password, clique Verify;
5. Enter the path to a network share on the SCCM server (also may click Browse and select folder)e clique Test connection. Na janela pop-up, clique em OK.
6. Clique OK to close the Windows User Account window;
7. Account added, clique OK;
