Korzystając z tej witryny, zgadzasz się na Polityka prywatności.
Przyjąć
EnterineEnterineEnterine
  • DOM
  • To pro
  • Tech
  • Microsoft
    • Lazur
    • Menedżer konfiguracji/SCCM
    • DPM
    • Orkiestrator
    • Hyper-V.
    • Niejawny tester Microsoft Edge
    • MSI
    • Biuro 365
    • Nieznajomy biura
    • Power bi
    • Skype'a
    • Serwer SQL
    • Zespoły
  • OKNA
    • Centrum administracyjne systemu Windows
    • Klient Windowsa
    • Serwer Windows
  • Lista kolekcji zapytań SCCM
Czytanie: Wyjaśnienie zamieszania: Serwer Windows 2012 Wyjaśnienie wymagań systemowych R2
Zmiana rozmiaru czcionkiAaa
EnterineEnterine
Zmiana rozmiaru czcionkiAaa
  • DOM
  • To pro
  • Tech
  • Microsoft
  • OKNA
  • Lista kolekcji zapytań SCCM
Szukaj
  • DOM
  • To pro
  • Tech
  • Microsoft
    • Lazur
    • Menedżer konfiguracji/SCCM
    • DPM
    • Orkiestrator
    • Hyper-V.
    • Niejawny tester Microsoft Edge
    • MSI
    • Biuro 365
    • Nieznajomy biura
    • Power bi
    • Skype'a
    • Serwer SQL
    • Zespoły
  • OKNA
    • Centrum administracyjne systemu Windows
    • Klient Windowsa
    • Serwer Windows
  • Lista kolekcji zapytań SCCM
Serwer Windows

Wyjaśnienie zamieszania: Serwer Windows 2012 Wyjaśnienie wymagań systemowych R2

Opublikowany: Luty 11, 2024
7 Min. odczyt
UDZIAŁ

Wyjaśnienie zamieszania: Serwer Windows 2012 Wyjaśnienie wymagań systemowych R2.

  • Installation is the basic concept of getting the new operating system on your hardware. Specifically, a clean installation requires deleting the previous operating system.
  • Upgrade means moving from your existing operating system to Windows Server 2012 R2, while staying on the same hardware. Even while staying on the same hardware, some server roles might require specific steps to ensure a smooth upgrade.
  • Migration means moving from your existing operating system to Windows Server 2012 R2 by transferring to a different set of hardware.

Clean installation

Before you start a clean installation of Windows Server 2012 R2, you should perform the following steps.

  1. Review the system requirements
  2. Review preinstallation documentation
  3. Obtain the product
  4. Perform preinstallation tasks

Edytor

Processor performance depends not only on the clock frequency of the processor but also on the number of processor cores and the size of the processor cache.

  • Minimum: 1.4 Procesor 64-bitowy GHz

BARAN

Poniżej znajdują się szacunkowe wymagania RAM dla tego produktu:

  • Minimum: 512 MB (Only for installation, for using you need more)

Ważny

Jeśli utworzysz maszynę wirtualną z minimalnymi obsługiwanymi parametrami sprzętowymi (1 rdzeń procesora i 512 MB Ram) a następnie spróbuj zainstalować tę wersję na maszynie wirtualnej, Konfiguracja nie powiedzie się.

Aby tego uniknąć, wykonaj jedną z poniższych czynności:

  • Przydziel więcej niż 800 MB RAM to the virtual machine you intend to install in this release. Once Setup has been completed, możesz zmienić alokację na tak małą jak 512 MB Ram, w zależności od aktualnej konfiguracji serwera.
  • Przerwać proces rozruchu tej wersji na maszynie wirtualnej z Shift+F10. W otwartym wierszu poleceń, użyj narzędzia Diskpart.exe do utworzenia i sformatowania partycji instalacyjnej. Uruchomić Wpeutil createpagefile /path=C:\pf.sys (zakładając, że utworzona partycja instalacyjna to C:). Zamknij wiersz poleceń i kontynuuj instalację.

Disk space requirements

The following are the estimated minimum disk space requirements for the system partition.

  • Minimum: 32 GB (Only for installation, for using you need more)

Partycja systemowa będzie potrzebować dodatkowej przestrzeni w którejkolwiek z poniższych sytuacji:

  • Jeśli instalujesz system przez sieć.
  • Komputery z ponad 16 GB pamięci RAM będzie wymagało więcej miejsca na dyski do stronicowania, hibernacja, i zrzuć pliki.

Inne wymagania

You also must have the following:

  • Gigabit (10/100/1000baseT) Ethernet adapter
  • DVD drive (if you intend to install the operating system from DVD media)

Perform preinstallation tasks

Before you install Windows Server 2012 R2, follow the steps in this section to prepare for the installation.

  • Disconnect UPS devices. If you have an uninterruptible power supply (UPS) connected to your destination computer, disconnect the serial cable before running Setup. Setup automatically attempts to detect devices that are connected to serial ports, and UPS equipment can cause issues with the detection process.
  • Back up your servers. Your backup should include all data and configuration information that is necessary for the computer to function. It is important to perform a backup of configuration information for servers, especially those that provide network infrastructure, such as Dynamic Host Configuration Protocol (DHCP) servers. When you perform the backup, be sure to include the boot and system partitions and the system state data. Another way to back up configuration information is to create a backup set for Automated System Recovery.
  • Disable your virus protection software. Virus protection software can interfere with installation. Na przykład, it can make installation much slower by scanning every file that is copied locally to your computer.
  • Provide mass storage drivers. If your manufacturer has supplied a separate driver file, save the file to a floppy disk, CD, płyta DVD, or Universal Serial Bus (USB) flash drive in either the root directory of the media or the amd64 falcówka. To provide the driver during Setup, on the disk selection page, trzask Load Driver (or press F6). You can browse to locate the driver or have Setup search the media.
  • Be aware that Windows Firewall is on by default. Server applications that must receive unsolicited inbound connections will fail until you create inbound firewall rules to allow them. Check with your application vendor to determine which ports and protocols are necessary for the application to run correctly.

Evaluation versions of Windows Server 2012 R2

Evaluation versions are 64-bit only and can be installed with the Server Core option or the Server with a GUI option. For more information about these installation options, how to convert between them, and how to use the Minimal Server Interface and Features on Demand.

For all editions, you have 10 days to complete online activation, at which point the evaluation period begins and runs for 180 dni. During the evaluation period, a notification on the Desktop displays the days remaining in the evaluation period (except in Windows Server 2012 Essentials). You can also run slmgr.vbs /dlv from an elevated command prompt to see the time remaining.

slmgr.vbs /dlv

Limits of evaluation versions

All evaluation versions are fully functional during the evaluation period, although booting to Safe mode is not available. The Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter editions come with the activation key pre-installed. After the 180-day evaluation period elapses, the server warns you in various ways depending on the edition:

Serwer Windows 2012 R2 Standard; Serwer Windows 2012 R2 Datacenter:

  • The following warning appears on the Desktop: Windows License is expired
  • When you log on to Windows, you are prompted with the following options:
    • Activate now
    • Ask me later
  • The system shuts down every hour.
  • The only updates that can be installed are security updates.
  • Event ID 100 from source WLMS “The license period for this installation of Windows has expired. The operating system will shut down every hour.” appears in the Application log.
OZNACZONE:Serwer Microsoft WindowsOknaWindows Server 2012R2
Poprzedni artykuł Jak wykonać kopię zapasową i przywrócić układ menu Start w systemie Windows 10: Przewodnik krok po kroku
Następny artykuł Configuration Manager The Server cannot be deleted
Zostaw komentarz Zostaw komentarz

Zostaw odpowiedź Anuluj odpowiedź

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są zaznaczone *

Ta strona korzysta z Akismet w celu ograniczenia spamu. Dowiedz się, jak przetwarzane są dane dotyczące Twoich komentarzy.

Tłumaczenie

English中文(简体)DanskNederlandsFrançaisDeutschItaliano한국어PolskiPortuguêsRomânăEspañolУкраїнська
przez Transposh - translation plugin for wordpress

Popularne posty

Wymagania systemowe dla serwera Windows 2016
Serwer Windows
Lista kolekcji zapytań programu Menedżer konfiguracji
Lista kolekcji zapytań programu Menedżer konfiguracji
Configmgr
Nawigacja strukturalna/zarządzana włączona na nowoczesnych stronach w klasycznych witrynach zespołu
Tech
SCCM Nie udało się uzyskać lokalizacji DP w oczekiwanej wersji z MP
Configmgr

Ostatnie posty

Instalowanie i konfigurowanie Fail2ban dla ochrony SSH na Ubuntu 24.04
Linuksa
Włączanie i konfiguracja FirewallD na AlmaLinux
Linuksa
Tworzenie użytkownika i konfiguracja klucza SSH w AlmaLinux
Linuksa
Jak zresetować hasło w AlmaLinux
Linuksa

© 2023 Enterine

Przejdź do wersji mobilnej
Witamy z powrotem!

Zaloguj się na swoje konto

Nazwa użytkownika lub adres e-mail
Hasło

Zgubiłeś hasło?