Guide to Installing SCCM Requirements: SQL Configuration, Разширяване на схемата на Active Directory и инсталиране на роли на Windows Server.
SQL Configuration
For normal work, you must use the next memory size for SCCM SQL:
- минимум 8192 for “Primary Site“;
- минимум 4096 for “Secondary Site“;
When you use a database server that is co-located with the site server, dedicate 50 percent of the available addressable system memory for SQL Server.
When you use a dedicated SQL Server, dedicate 80 percent of the available addressable system memory for SQL Server.
Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory in the buffer pool used by an instance of SQL Server for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio.”
Technet
В моя случай, I have very weak SQL, so I only show where and how to set these limits.
1. Run “Microsoft SQL Server Management Studio“;
2. Connect to your “SCCM Instance”. Enter “Server Name” and click the “Свържете се” бутон;
3. Десен бутон на мишката click on the instance and select “Имоти“;
4. Отидете на „памет" и задайте "Minimum server memory (in MB)" и "Maximum server memory (in MB)” according to the information I wrote earlier. Click the “Добре” бутон;
5. To apply these changes you must restart instance services, you can do it from “Microsoft SQL Server Management Studio“. Десен бутон на мишката click on the instance and select “Рестартирам“;
6. Щракнете върху „да” on pop-up windows;
Active Directory schema extending
When you extend the Active Directory schema for System Center 2012 Configuration Manager, you can publish site information to Active Directory Domain Services. Extending the Active Directory schema is optional for Configuration Manager. въпреки това, by extending the schema you can use all Configuration Manager features and functionality with the least amount of administrative overhead.
If you decide to extend the Active Directory schema, you can do so before or after you run Configuration Manager Setup.
TechNe
1. Log in to your “Domain Controller Schema Master“. Mount “*.ISO” with SCCM installation files. Отидете на „<drive letter>\SMSSETUP\BIN\X64” and run “extadsch.exe“;
2. After step “1” go to “° С:\” and open “ExtADSch.log” if all is good you must see the next string;
3. Open your apps list and run “ADSI Edit“;
4. Десен бутон на мишката кликнете върху "ADSI Edit” and select “Connect to“;
5. Leave defaults and click the “Добре” бутон;
6. Find “CN=System” in the list. Десен бутон на мишката кликнете върху "CN=System“, изберете "Нов” and then “Object“;
7. In the list select “Container” and click the “Следващия” бутон;
8. Enter “Стойност” System Management and click the “Следващия” бутон;
9. Click the “завършек” бутон;
10. Десен бутон на мишката кликнете върху "CN=System Management“ и щракнете върху „Имоти“;
11. Select “Сигурност“;
12. Click the “Добавете” бутон;
13. In the “Object Types” add “Компютри“, enter your SCCM server name, and click the “Добре” бутон;
14. Set the checkmark “Full control” (like on the screenshot) and click the “Добре” бутон;
Windows Server Roles and Features installation
My deployment scenario:
- SQL 2016 on Windows сървър 2016 with separated disks (System, DB’s, Temp);
- SCCM 1606 on Windows сървър 2016 with two disks (one for the system and one for data, like updates and apps)
1. Let’s make some tuning of our server. I need to host SCCM data on disk “D“. To do this we must create a blank file “NO_SMS_ON_DRIVE.SMS” in the root of disk “° С“;
2. Make sure it is blank;
3. Next we need at Windows Server Roles and Features. In the “Мениджър на сървъра” in the upper menu click “Manage” and then “Добавяне на роли и функции“;
4. Click the “Следващия” бутон. (you may set the checkmark “Skip this page by default” and this window don’t appear next time);
5. Leave by default “Инсталиране, базирано на роли или функции” and click the “Следващия” бутон;
6. Select the target server and click the “Следващия” бутон (I have only one server);
7. Set a check mark on the “Уеб сървър (IIS)” role, in the pop-up window click the “Добавяне на функции” бутон;
” role, in the pop-up window click the “Добавяне на функции” бутон;
8. Set the check mark on “Windows Server Update Services (WSUS)“, in the pop-up window click the “Добавяне на функции” бутон;
9. After all steps click the “Следващия” бутон;
10. Set check mark on “.NET Framework 3.5 Характеристика” and set check marks, like on the screenshot;
11. Set check mark on “Background Intelligent Transfer Service (BITS)“;
12. In the pop-up window click “Добавяне на функции“;
13. Set the check mark on “Дистанционна диференциална компресия“ и щракнете върху „Следващия“;
ЗАБЕЛЕЖКА: I use Server 2016, if you use another Windows Server (2012 или 2012 R2) you must install WSUS 3.0 Service Pack 2.
14. Let’s configure “IIS Role“, and click the “Следващия” бутон;
15. Set check marks, like on screenshots;
16. After all actions click the “Следващия” бутон;
17. Let’s configure “WSUS Role“, and click the “Следващия” бутон;
18. Set check marks on “WSUS Services“, I use the database on SCCM SQL Server, so I also set the checkmark “SQL Server Connectivity“. (If you want to use a local database for WSUS – don’t set the check mark on SQL and set the checkmark on “WID Connectivity“). Click the “Следващия” бутон;
19. Set the checkmark and enter the path for storing updates (I use “D:\WSUS“). Click the “Следващия” бутон;
20. Enter “<SQL Server name>\<Instance name>“, and click the “Check connection” button to check the connection. If all is good, щракнете върху „Следващия” бутон;
ЗАБЕЛЕЖКА: I don’t have Internet access on this machine, so I need to specify the source path for feature installation (“.NET Framework 3.5“). Click “Specify an alternate source path“;
21. Enter “<windows source files DVD or *iso disk>\източнициsxs“ и щракнете върху „Добре” бутон;
22. Click the “Инсталирай” бутон;
23. Installation starts;
24. When the installation is finished, щракнете върху „Близо” бутон;
25. Click on the yellow triangle and then click “Launch Post-Installation tasks” (finish WSUS installation);
26. Post-installation finished;
27. If you install WSUS with SQL database, go to SQL Server. You will see “SUSDB” file and “SUSDB” database in “SQL Server Management Studio“;
Windows ADK installation
Download the installation file from Windows ADK Site. You may install it from the WEB or download files to install it on another computer. Let’s do both options.
2. If you choose the online installation. Run the downloaded file “adksetup.exe“. Select “Install the Windows Assessment and Deployment Kit – Windows 10 to this computer“. Click the “Следващия” бутон;
3. Select “да” or “No” (read the text in the window to make choice). Click the “Следващия” бутон;
4. Read “License Agreement” and click the “Приеми” бутон;
5. Select components required for SCCM successful installation, like in the screenshot. Click the “Install” button to start the installation.
6. If you choose the offline installation. Select a folder to download installation files and click the “Следващия” бутон;
7. Copy downloaded files to the target machine and run “adksetup.exe“;
8. Click the “Следващия” бутон;
9. Next repeat steps “3-5“;
10. In both variants at the end of installation click the “Close” button. (Also you may explore Windows ADK documentation on MSDN if you need, by setting a checkmark);
ЗАБЕЛЕЖКА: Don’t forget to reboot after installation. It takes a very long time to install.