Guide to Installing SCCM Requirements: SQL Configuration, Active Directory Schema Extending and Windows Server Roles Installation.
SQL Configuration
For normal work, you must use the next memory size for SCCM SQL:
- Minimum 8192 for “Primary Site“;
- Minimum 4096 for “Secondary Site“;
When you use a database server that is co-located with the site server, dedicate 50 percent of the available addressable system memory for SQL Server.
When you use a dedicated SQL Server, dedicate 80 percent of the available addressable system memory for SQL Server.
Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory in the buffer pool used by an instance of SQL Server for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio.”
Technet
Trong trường hợp của tôi, I have very weak SQL, so I only show where and how to set these limits.
1. Run “Microsoft Studio quản lý máy chủ SQL“;
2. Connect to your “SCCM Instance”. Enter “Tên máy chủ” và nhấp vào “Kết nối" cái nút;
3. Nút chuột phải click on the instance and select “Của cải“;
4. Go to “Ký ức" và thiết lập "Minimum server memory (in MB)” and “Maximum server memory (in MB)” according to the information I wrote earlier. Nhấn vào "ĐƯỢC RỒI" cái nút;
5. To apply these changes you must restart instance services, you can do it from “Microsoft Studio quản lý máy chủ SQL“. Nút chuột phải click on the instance and select “Khởi động lại“;
6. Nhấp chuột "Đúng” on pop-up windows;
Active Directory schema extending
When you extend the Active Directory schema for System Center 2012 Configuration Manager, you can publish site information to Active Directory Domain Services. Extending the Active Directory schema is optional for Configuration Manager. Tuy nhiên, by extending the schema you can use all Configuration Manager features and functionality with the least amount of administrative overhead.
If you decide to extend the Active Directory schema, you can do so before or after you run Configuration Manager Setup.
TechNe
1. Log in to your “Domain Controller Schema Master“. Mount “*.iso” with SCCM installation files. Go to “<drive letter>\SMSSETUP\BIN\X64” and run “extadsch.exe“;
2. After step “1” go to “C:\” and open “ExtADSch.log” if all is good you must see the next string;
3. Open your apps list and run “ADSI Chỉnh sửa“;
4. Nút chuột phải click on “ADSI Chỉnh sửa” and select “Kết nối với“;
5. Leave defaults and click the “ĐƯỢC RỒI" cái nút;
6. Find “CN=System” in the list. Nút chuột phải click on “CN=System“, lựa chọn "Mới” and then “Object“;
7. In the list select “Container” và nhấp vào “Kế tiếp" cái nút;
8. Enter “Giá trị” System Management and click the “Kế tiếp" cái nút;
9. Nhấn vào "Hoàn thành" cái nút;
10. Nút chuột phải click on “CN=System Management” và nhấp vào “Của cải“;
11. Lựa chọn "Bảo vệ“;
12. Nhấn vào "Thêm vào" cái nút;
13. In the “Object Types” add “Máy tính“, enter your SCCM server name, and click the “ĐƯỢC RỒI" cái nút;
14. Set the checkmark “Full control” (like on the screenshot) and click the “ĐƯỢC RỒI" cái nút;
Windows Server Roles and Features installation
My deployment scenario:
- SQL 2016 TRÊN máy chủ Windows 2016 with separated disks (Hệ thống, DB’s, Temp);
- SCCM 1606 TRÊN máy chủ Windows 2016 with two disks (one for the system and one for data, like updates and apps)
1. Let’s make some tuning of our server. I need to host SCCM data on disk “D“. To do this we must create a blank file “NO_SMS_ON_DRIVE.SMS” in the root of disk “C“;
2. Make sure it is blank;
3. Next we need at Windows Server Roles and Features. In the “Quản lý máy chủ” in the upper menu click “Quản lý” and then “Thêm vai trò và tính năng“;
4. Nhấn vào "Kế tiếp" cái nút. (you may set the checkmark “Skip this page by default” and this window don’t appear next time);
5. Leave by default “Cài đặt dựa trên vai trò hoặc dựa trên tính năng” và nhấp vào “Kế tiếp" cái nút;
6. Select the target server and click the “Kế tiếp" cái nút (I have only one server);
7. Set a check mark on the “Web Server (IIS)” role, in the pop-up window click the “Thêm các tính năng" cái nút;
” role, in the pop-up window click the “Thêm các tính năng" cái nút;
8. Set the check mark on “Windows Server Update Services (WSUS)“, in the pop-up window click the “Thêm các tính năng" cái nút;
9. After all steps click the “Kế tiếp" cái nút;
10. Set check mark on “.Nền tảng NET 3.5 Đặc trưng” and set check marks, like on the screenshot;
11. Set check mark on “Dịch vụ chuyển giao thông minh nền (CHÚT ÍT)“;
12. In the pop-up window click “Thêm các tính năng“;
13. Set the check mark on “Nén vi sai từ xa” và nhấp vào “Kế tiếp“;
GHI CHÚ: I use Server 2016, if you use another Windows Server (2012 hoặc 2012 R2) you must install WSUS 3.0 Service Pack 2.
14. Let’s configure “IIS Role“, and click the “Kế tiếp" cái nút;
15. Set check marks, like on screenshots;
16. After all actions click the “Kế tiếp" cái nút;
17. Let’s configure “WSUS Role“, and click the “Kế tiếp" cái nút;
18. Set check marks on “Dịch vụ WSUS“, I use the database on SCCM SQL Server, so I also set the checkmark “SQL Server Connectivity“. (If you want to use a local database for WSUS – don’t set the check mark on SQL and set the checkmark on “WID Connectivity“). Nhấn vào "Kế tiếp" cái nút;
19. Set the checkmark and enter the path for storing updates (I use “D:\WSUS“). Nhấn vào "Kế tiếp" cái nút;
20. Enter “<Tên máy chủ SQL>\<Instance name>“, and click the “Check connection” button to check the connection. If all is good, nhấn vào "Kế tiếp" cái nút;
GHI CHÚ: I don’t have Internet access on this machine, so I need to specify the source path for feature installation (“.NET Framework 3.5“). Click “Specify an alternate source path“;
21. Enter “<windows source files DVD or *iso disk>\nguồnsxs” và nhấp vào “ĐƯỢC RỒI" cái nút;
22. Nhấn vào "Cài đặt" cái nút;
23. Cài đặt bắt đầu;
24. Khi quá trình cài đặt kết thúc, nhấn vào "Đóng" cái nút;
25. Click on the yellow triangle and then click “Khởi chạy các tác vụ sau cài đặt” (finish WSUS installation);
26. Post-installation finished;
27. If you install WSUS with SQL database, go to SQL Server. You will see “SUSDB” file and “SUSDB” database in “Studio quản lý máy chủ SQL“;
Windows ADK installation
Download the installation file from Windows ADK Site. You may install it from the WEB or download files to install it on another computer. Let’s do both options.
2. If you choose the online installation. Run the downloaded file “adksetup.exe“. Select “Install the Windows Assessment and Deployment Kit – Windows 10 to this computer“. Nhấn vào "Kế tiếp" cái nút;
3. Lựa chọn "Đúng” or “KHÔNG” (read the text in the window to make choice). Nhấn vào "Kế tiếp" cái nút;
4. Read “License Agreement” và nhấp vào “Chấp nhận" cái nút;
5. Select components required for SCCM successful installation, like in the screenshot. Click the “Install” button to start the installation.
6. If you choose the offline installation. Select a folder to download installation files and click the “Kế tiếp" cái nút;
7. Copy downloaded files to the target machine and run “adksetup.exe“;
8. Nhấn vào "Kế tiếp" cái nút;
9. Next repeat steps “3-5“;
10. In both variants at the end of installation click the “Close” button. (Also you may explore Windows ADK documentation on MSDN if you need, by setting a checkmark);
GHI CHÚ: Don’t forget to reboot after installation. It takes a very long time to cài đặt.