Guide to Installing SCCM Requirements: SQL Configuration, Active Directory Schema Extending and Windows Server Roles Installation.
SQL Configuration
For normal work, you must use the next memory size for SCCM SQL:
- Asgari 8192 for “Primary Site“;
- Asgari 4096 for “Secondary Site“;
When you use a database server that is co-located with the site server, dedicate 50 percent of the available addressable system memory for SQL Server.
When you use a dedicated SQL Server, dedicate 80 percent of the available addressable system memory for SQL Server.
Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory in the buffer pool used by an instance of SQL Server for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio.”
Technet
Benim durumumda, I have very weak SQL, so I only show where and how to set these limits.
1. Run “Microsoft SQL Server Yönetim Stüdyosu“;
2. Connect to your “SCCM Instance”. Girmek "Sunucu adı” ve “Bağlamak" düğme;
3. Sağ fare tuşu click on the instance and select “Özellikler“;
4. şuraya git:Hafıza” ve “ ayarlaMinimum sunucu belleği (MB cinsinden)" Ve "Maksimum sunucu belleği (MB cinsinden)” according to the information I wrote earlier. Tıkla "TAMAM" düğme;
5. To apply these changes you must restart instance services, you can do it from “Microsoft SQL Server Yönetim Stüdyosu“. Sağ fare tuşu click on the instance and select “Tekrar başlat“;
6. Tıklamak "Evet” on pop-up windows;
Active Directory schema extending
When you extend the Active Directory schema for System Center 2012 Configuration Manager, you can publish site information to Active Directory Domain Services. Extending the Active Directory schema is optional for Configuration Manager. Fakat, by extending the schema you can use all Configuration Manager features and functionality with the least amount of administrative overhead.
If you decide to extend the Active Directory schema, you can do so before or after you run Configuration Manager Setup.
TechNe
1. Log in to your “Domain Controller Schema Master“. Mount “*.iso” with SCCM installation files. şuraya git:<sürücü harfi>\SMSSETUP\BIN\X64” and run “extadsch.exe“;
2. After step “1” go to “C:\” ve aç “ExtADSch.log” if all is good you must see the next string;
3. Open your apps list and run “ADSI Düzenlemesi“;
4. Sağ fare tuşu tıklamak "ADSI Düzenlemesi” ve “ öğesini seçinBağlanmak“;
5. Leave defaults and click the “TAMAM" düğme;
6. Find “CN=System” in the list. Sağ fare tuşu tıklamak "CN=System“, seçme "Yeni” and then “Nesne“;
7. In the list select “Container” ve “Sonraki" düğme;
8. Girmek "Değer” System Management ve “Sonraki" düğme;
9. Tıkla "Sona ermek" düğme;
10. Sağ fare tuşu tıklamak "CN=System Management” ve “ tıklayınÖzellikler“;
11. Seçme "Güvenlik“;
12. Tıkla "Eklemek" düğme;
13. İçinde "Object Types” add “bilgisayarlar“, SCCM sunucu adınızı girin, ve “TAMAM" düğme;
14. Set the checkmark “Full control” (like on the screenshot) ve “TAMAM" düğme;
Windows Server Roles and Features installation
My deployment scenario:
- SQL 2016 on Windows Server 2016 with separated disks (sistem, DB’s, Temp);
- SCCM 1606 on Windows Server 2016 with two disks (one for the system and one for data, like updates and apps)
1. Let’s make some tuning of our server. I need to host SCCM data on disk “D“. To do this we must create a blank file “NO_SMS_ON_DRIVE.SMS” in the root of disk “C“;
2. Make sure it is blank;
3. Next we need at Windows Server Roles and Features. İçinde "Sunucu Yöneticisi” in the upper menu click “Üstesinden gelmek” and then “Rolleri ve Özellikleri Ekleyin“;
4. Tıkla "Sonraki" düğme. (you may set the checkmark “Skip this page by default” and this window don’t appear next time);
5. Leave by default “Rol tabanlı veya özellik tabanlı kurulum” ve “Sonraki" düğme;
6. Select the target server and click the “Sonraki" düğme (I have only one server);
7. Set a check mark on the “Web sunucusu (IIS)” role, in the pop-up window click the “Özellik Ekle" düğme;
” role, in the pop-up window click the “Özellik Ekle" düğme;
8. Set the check mark on “Windows Server Update Services (WSUS)“, in the pop-up window click the “Özellik Ekle" düğme;
9. After all steps click the “Sonraki" düğme;
10. Set check mark on “.NET Çerçevesi 3.5 Özellikler” and set check marks, like on the screenshot;
11. Set check mark on “Arka Plan Akıllı Aktarım Hizmeti (BITS)“;
12. In the pop-up window click “Özellik Ekle“;
13. Set the check mark on “Uzak Diferansiyel Sıkıştırma” ve “ tıklayınSonraki“;
NOT: I use Server 2016, if you use another Windows Server (2012 veya 2012 R2) you must install WSUS 3.0 Service Pack 2.
14. Let’s configure “IIS Role“, ve “Sonraki" düğme;
15. Set check marks, like on screenshots;
16. After all actions click the “Sonraki" düğme;
17. Let’s configure “WSUS Role“, ve “Sonraki" düğme;
18. Set check marks on “WSUS Hizmetleri“, I use the database on SCCM SQL Server, so I also set the checkmark “SQL Server Connectivity“. (If you want to use a local database for WSUS – don’t set the check mark on SQL and set the checkmark on “WID Connectivity“). Tıkla "Sonraki" düğme;
19. Set the checkmark and enter the path for storing updates (I use “D:\WSUS“). Tıkla "Sonraki" düğme;
20. Girmek "<SQL Server name>\<Instance name>“, and click the “Check connection” button to check the connection. If all is good, tıkla "Sonraki" düğme;
NOT: I don’t have Internet access on this machine, so I need to specify the source path for feature installation (“.NET Framework 3.5“). Click “Specify an alternate source path“;
21. Girmek "<windows source files DVD or *iso disk>\kaynaklarsxs” ve “ tıklayınTAMAM" düğme;
22. Tıkla "Düzenlemek" düğme;
23. Kurulum başlar;
24. Kurulum tamamlandığında, tıkla "Kapalı" düğme;
25. Click on the yellow triangle and then click “Kurulum Sonrası görevleri başlatın” (finish WSUS installation);
26. Post-installation finished;
27. If you install WSUS with SQL database, go to SQL Server. You will see “SUSDB” file and “SUSDB” database in “SQL Server Yönetim Stüdyosu“;
Windows ADK installation
Download the installation file from Windows ADK Site. You may install it from the WEB or download files to install it on another computer. Let’s do both options.
2. If you choose the online installation. Run the downloaded file “adksetup.exe“. Select “Install the Windows Assessment and Deployment Kit – Windows 10 to this computer“. Tıkla "Sonraki" düğme;
3. Seçme "Evet” or “HAYIR” (read the text in the window to make choice). Tıkla "Sonraki" düğme;
4. Read “License Agreement” ve “Kabul etmek" düğme;
5. Select components required for SCCM successful installation, like in the screenshot. Click the “Install” button to start the installation.
6. If you choose the offline installation. Select a folder to download installation files and click the “Sonraki" düğme;
7. Copy downloaded files to the target machine and run “adksetup.exe“;
8. Tıkla "Sonraki" düğme;
9. Next repeat steps “3-5“;
10. In both variants at the end of installation click the “Close” button. (Also you may explore Windows ADK documentation on MSDN if you need, by setting a checkmark);
NOT: Kurulumdan sonra yeniden başlatmayı unutmayın. BT takes a very long time to düzenlemek.