A Step-by-Step Guide to Configuring DHCP on Windows Server 2016 Using GUI and PowerShell.
With GUI
1. Run ది DHCP console from the apps list. నావిగేట్ చేయండి IPv4\Server Options. There we config Server options for all scopes;
2. Right Mouse Button click at Server Options మరియు క్లిక్ చేయండి Configure Options;
3. Select option 006 DNS Servers, enter an IP address, మరియు క్లిక్ చేయండి జోడించు;
4. Select option 015 DNS Domain Name, enter the domain name, మరియు క్లిక్ చేయండి అలాగే;
5. New options added;
6. Right Mouse Button click at IPv4 మరియు క్లిక్ చేయండి New Scope;
7. క్లిక్ చేయండి తరువాత;
8. Enter పేరు (and if you wish Description), మరియు క్లిక్ చేయండి తరువాత;
9. Enter the Start IP address, End IP address, మరియు Subnet mask, మరియు క్లిక్ చేయండి తరువాత;
10. On this page, you may exclude the IP range from DHCP. క్లిక్ చేయండి తరువాత;
11. సెట్ Lease Duration మరియు క్లిక్ చేయండి తరువాత;
12. You may select Yes and configure Scope Options for this scope. I choose No, క్లిక్ చేయండి తరువాత;
13. క్లిక్ చేయండి Finish;
14. Scope created, but we must Activate it;
15. Right Mouse Button click at the scope and click Activate;
16. Scope activated and worked!
17. If you Right Mouse Button click on Leased IP Address, you may Add to the reservation Add to the filter, or even Delete it;
With PowerShell
1. Run PowerShell as Administrator. To get active scopes enter:
Get-DhcpServerv4Scope -cn <dhcp server name> | select scopeid, name, description
2. To add new scope, enter:
Add-DhcpServerv4Scope -Name ‘<scope name>’ -StartRange <start IP Address> -EndRange <end IP Address> -SubnetMask <subnet mask> -Description ‘<description>’ –cn <dhcp server name>
3. Before scope delete Best Practices is run the command with WhatIf parameter:
Remove-DhcpServerv4Scope -ScopeId <scope id> -cn <dhcp server name> -WhatIf
4. Then run without the WhatIf parameter:
Remove-DhcpServerv4Scope -ScopeId <scope id> -cn <dhcp server name>
5. Scope removed.